Choosing The Proper Finish For Your Woodworking Project
Jonti-Craft Childs Rocker Wood Rocking Chair 0578JC
If you've finished your woodworking project, congratulations. Now, what type of finish do you want to put on it so that not only will you protect your hard work for years to come, but also enhance its innate beauty? No matter what you choose, you have to choose the right finish so that your hard work will be as beautiful finished as it was unfinished. Choosing the wrong finish can make your project look less beautiful than it should.
Well, here are some things to consider. You'll need to choose a finishing product such as a varnish, lacquer, shellac, or polyurethane; you might also need putty, wood filler, wax or polish. In addition, you'll need to choose from water or solvent bases for the finishing products. Which to choose?
It might be confusing, but once you know what you're doing, you can group these rather simply so that it's much easier to choose. Once you know what each group's properties are, you can make a better and more informed choice about what you'll need for your woodworking project.
Let's begin with stains. When you apply a stain to wood, you add color to the wood without covering up the grain. This is a basic difference between staining or painting something.
Stains that are pigmented are made when a pigment is combined with a liquid. Usually, the pigment itself is in a dry colored powder before it is mixed with the liquid. The liquid itself includes a binder that helps the pigment stick to the wood surface. There's also a carrier that works with the binder. The pigment does not dissolve in the binder, but are suspended in the liquid. In earlier times, you could purchase the colored powders to make pigments up; these were usually available in such colors as yellow, red, or burned charcoal, and were made from different types of clay and crushed rock.
If a stain is a "dye stain," it's physically and chemically different than a pigment stain is. Dye stains coat just like pigment stains do, but dye stains dissolve in the carrier instead of being suspended in it. Because a dye stain dissolves, it can deeply and easily penetrate the wood surface, unlike a pigment stain. However, the dye stain particles are very small and somewhat translucent. This, in turn, allows the wood grain to show through the dye stain.
One problem with stains of either kind, either pigments or dye, is that oftentimes, their color does not apply evenly, especially on softer woods like cherry, pine or birch. With these softer woods, you'll want to stain a piece of scrap wood first to see if uneven coloring or blotchiness will be a problem. If the stain appears to blotch or otherwise not appear uniform on your test piece, you have other options you can try. For example, you can switch to a gel stain or a water-based stain instead. Both of these types of stains only penetrate the wood ever so slightly and can give you a much more even stain color.
Megan Cherry writes for http://www.pegandrail.com If you are looking for a high quality well made coat rack step in and check us out, we manufacture a complete line of wall mounted coat rack from a shaker peg style coat rack to a modern wall coat rack with brass hooks or satin nickel for the brushed stainless steel look we even have a very modern looking hand rub white lacquer coat racks to go along with our line of Oak, cherry and Maple wall coat racks, we can even manufacture you a custom size coat rack or even ship you a coat rack that is unfinished.
Related Articles:
Woodworking Goes Web 2.0 with TheWoodWhisperer.com
Marc Spagnuolo, AKA The Wood Whisperer, takes you into his fresh vision of woodworking through video podcasts, chatrooms, and even a live streaming shop web-cam. TheWoodWhisperer.com was picked as Best of iTunes 2006 Staff Favorites and is the first website of its kind, allowing people of all ages and skill levels to learn, watch, and interact with others interested in the age old craft of woodworking.
Selling Woodworking On ebay
Creating your own products to sell online is definitely a unique way to be your own supplier. A lot of people really love to buy unique items that cater to craftsmanship. If you have good skills you can do well.
Combine Business Woodworking Skills for Profit
The CyberValue Store is pleased to announce an updated and revised edition of The Complete Woodworking Business Guidebook. The book was written especially for serious woodworking enthusiasts who wish to sell their skills as well as share them.
Is Your Woodworking Hendered By A Lack Of Tools?
Most beginners aren?t sure which way to turn when trying to find the best wood working tools for their needs. They often wonder which are the best out on the market. The professionals however can spit out the names in a moment?s notice of all of the best tools out there, or at least what they prefer. The fact of the matter is that there?s a lot of quality woodworking tools and brand names out there and soon you?ll have your favorites to recommend as well.
Construction Tools. Wood Router.
A router is a working tool of the wood used with the rout outside (cavity outside) a sector vis-a-vis a piece of wood. It was a tool used in particular by manufacturers of model and manufacturers of staircase and was composed of a plane out of wooden offering all the range of products of hand with a narrow blade projecting well beyond its base plate gaining it the tooth woman of nickname of the old woman. Since approximately 1960, it was replaced by the modern router of axis, which was designed for same work, although the first electric routers of hand appeared in years just before the First World War.
Woodworking Tools Are Key To Your Workshop
If you want good woodworking machinery there are several brand you can choose from. You will need a wide selection of tools and machines to have a home or pro woodworking workshop. Try selecting high quality brands of machinery such as Craftsman, Ridgid, Rockwell, and Milwaukee when you want to create your own woodworking workshop.
Construction Tools. Wood Router. The Features.
The tool is usually composed of a low housing a universal electric motor vertically assembled with a ring on the end of its axis. The little is size-adjustable to allow the projection by an opening in ladies punts, usually via adjusting the size of engine-support (the mechanism of the adjustment is changed considerably among manufacturers). The ordering of the router is derived from a handle or a button on each side from the device, or by the ?closed handle? recently more developed. There are two standard of dive of router and fixed types.
Contribution Of The Woodworking Show On Consumers
Home improvement and woodworking shows may cause more harm than good for some homeowners. Some Canadians, for example, are choosing their dream renovations rather than remodeling within their budget and financial reality. A recent survey showed that sixty percent of respondents who recently took on a home renovation actually developed a budget prior to beginning. However, twenty-seven percent spent more than budgeted. Sticking to a home improvement budget is, definitely, a challenge especially when television shows and magazines influence the desire for the latest appliances and trendy d?cor. Though the intention is good and many home renovators want to stay within their budget, it is often difficult which can cause major headaches once th...
The Basics Of Woodworking Planes
A woodworking plane is a tool that is used by a carpenter to shape and smooth wood. Hand woodworking planes were first used in ancient times and they are just as valuable to the craft of wood working today. The woodworking plane contains a sharp blade that literally shaves off pieces of the wood into the cutter?s desired shape. There are a number of different types of planes used for woodwork and each plane performs a different function, creating a different type of cut.
Picking The Right Tool For Woodworking
If you want to be able to handle any do-it-yourself projects in your home, make sure you have a work shop that has everything you need. Make sure you have the basic tools and any job, whether it is sawing, nailing, sanding, shaping or sharpening can be done.
Finding Quality And Affordable Woodworking Tools
Anyone with either a home or professional workshop knows the importance of having the right tools and equipment available, particularly the proper woodworking tools. Whether you simply enjoy DIY projects or engage in woodwork as a professional, the appropriate tools make a big difference during the job and with the final result. The quality and selection of tools has expanded in the past few years. It is now possible to supply your workshop with a wide range of quality products at affordable prices, including manufacturers such as Rockwell, Sears, Hitachi and Rigid. You can enjoy good quality tools and fine craftsmanship without spending more than necessary. Woodworking can be enjoyed with peace of mind.
Woodworking Can Be A Great Hobby
If you have your own woodworking shop then you know how important woodworking jigs is to your tool collection. Jigs can be used for lots of different projects. They can help your project to be managed easier and faster. You can buy a jig or you can make one if you choose to do so. You should know that they are pretty cheap to buy, but if you make one from scraps it can be even less expensive. It depends on the kinds of projects that you want to do for deciding what kind of jig you will need.
Woodworking Tools
Most people think "power tools" when they think of woodworking, but hand tools are also important for woodworking. If you are just starting out in woodworking, you want to make sure you get the right tools, and not spend a lot on unnecessary items.
Discount Tools E-retailer Announces Liquidation on Automotive, Woodworking, Hand and Power Tools
ToolsNow.com discount tools (http://www.toolsnow.com) distributor, has launched a Discount Power Tools Liquidation Sale on its Tools Now and Bosch Power Tools including Automotive tools, woodworking tools, hand tools and power tools.
Woodworking Machinery For Home
Since the beginning of time men have worked with wood to mould it into shelter and to serve many different functions. Really the only thing that has changed is the tools they use to make their projects. In fact, the basic concepts of drilling, sawing, and shaping have remained the same throughout time. It is only the speed and precision with which they are able to do it that has changed.